Click and discover the product details.
NI320 TILT SENSOR
150,00 €
NI320TILT is designed to ensure accuracy, flexibility, and safety, for use in applications like structural health monitoring. It allows for customizing the initial position for detecting angle changes.
Available on backorder
NI320TILT Tilt Sensor offers a range of features designed to ensure accuracy, flexibility, and safety. With its advanced MEMS Accelerometer, this sensor delivers high accuracy and reliable measurements of the tilt angle in three axes – X, Y, and Z. It has a wide measurement range of -90° to +90° and achieves an ultra-high resolution of 0.01° with an accuracy of ±1°.
In terms of flexibility, the NI320TILT can support up to 36 customized trigger alarms based on the angle or inclinations in each axis. This allows for a wide range of applications and provides great flexibility to users. Additionally, the sensor allows for customizing the initial position for detecting angle changes and sending threshold alarms, making installation easier and enhancing the user experience.
Moreover, the NI320TILT is designed for use in various applications, including structural health monitoring. Its robust enclosure and waterproof design ensure reliable performance even in outdoor environments. The sensor also supports wireless communication through Lora technology, making it easy to configure and install. By combining with LoRaWAN® gateway (NI400, NI67, NI65) and IoT Cloud solution, users can know the angles and tilt threshold alarms in real-time via browser or mobile app remotely.
Applications
- Dams
- Energy
- Environment
- Landslides
- Oil&Gas
- Structural
- Tunnels
- Water
- Wireless: LoraWan Based
- Frequency: CN470/RU864/IN865/EU868/US915/AU915/KR920/AS923
- Axis: 3 (X, Y, Z)
- Range: – 90° ~ +90°
- Accuracy: ± 1°
- Resolution: 0.01°
- Button: 1 for Reset (Internal)
- Power Supply: 2 × 3500 mAh ER17505 Li-SOCl2 Batteries
- Operating Temperature: -20°C to +60°C
- Relative Humidity: ≤95% (non-condensing)
- Protection: IP67
- Dimensions: 111 × 62 × 33 mm (4.37 × 2.44 × 1.30 in)
- Material & Color: ABS, Black
- Installation: On the flat surfaces with screws
-
NIVWSG VIBRATING WIRE STRAIN GAUGEThe vibrating wire strain gauges are used to measure stress in load-bearing structures or monitor tensions in tunnel linings during tunnel excavation phases.
-
NIIFF110 ANALOG INCLINOMETERThe In-place Inclinometer is a device that continuously measures deformation. The tube has two coasters, each equipped with wheels, that are inserted inside the inclinometer to measure the deformation.
-
NIIFF510 DIGITAL INCLINOMETER
The in-place inclinometer is a device that measures deformation by using a tilt sensor (or two tilt sensors at a 90-degree angle in the biaxial version) inside a stainless steel tube.
-
RM319 AIR QUALITY MONITORING SENSOR 525,00 €RM319 is an indoor air quality sensor, and it boasts 9 sensors in 1 device, including CO2, temperature, humidity, light, HCHO/O3 level, TVOC, PM2.5&PM10, motion, and barometric pressure.
-
RM103 AIR QUALITY MONITORING SENSOR From: 294,00 €RM103 Wireless Indoor Air Quality Monitoring with Ambiance Monitoring Sensor (AMS) is for tracking indoor CO2 levels, temperature, and humidity.
-
NI310 TILT SENSOR 120,00 €NI310-TIL has features like flexibility in threshold condition settings, easy configuration, and installation making it ideal for landslide and tunnel distortion monitoring.
-
NI300 WATER LEAK DETECTOR - ZONE 162,00 €NI300ZLD is designed for detecting the presence of liquids over a large area and is an indoor wireless LoRa water leak sensor with temperature and humidity sensing capabilities.
-
NI300 WATER LEAK DETECTOR - SPOT 108,00 €NI300SLD is a wireless LoRa water leak sensor for indoors with temperature and humidity sensors, ideal for monitoring pipe leakage, basement flooding, and pump failures.
-
NI1000 INCLINOMETERNI1000 LoRa Wireless Inclinometer sensor is ideal for angle measurement, horizontal adjustment, zero adjustment safety control, and ensuring safety in buildings, and civil engineering projects.
-
NI1000 TILT SENSORNI1000 Inclinometer for Solar Tracker is an Tilt Sensor with a single-axis structure. This device is ideal for use in IoT solar power monitoring systems, enabling monitoring of solar energy production.
Request informations about this product
By submitting this form you declare that you have read and accepted the processing of your personal data according to the Privacy policy